POWERCLAMP is a sophisticated surge suppression unit that provides the ultimate in transient protection with much lower clamping levels than any other TVSS device.

POWERCLAMP Series 80 wire-in PARALLEL TVSS devices are ideally suited for hospitals, airports, data centers, military installations, manufacturing plants and similar mission-critical facilities that have moderate exposure to lightning and other extreme transients. They are rated at 80,000 surge amps per phase and will prevent power line spikes from damaging computers, servers, audio/video, process control and other sensitive equipment. Their superior surge suppression will greatly improve system reliability and prevent the failures that are caused by power line disturbances. Operation is not affected by the power requirements of the load. Each line phase is fused, with a fuse status LED. An unlikely failure will not interrupt power to the load.

Series 80 PowerClamp units should be installed at sub-panels or on branch circuits with upstream (main panel) protection. The Series 80 can also be used at the main entry panel in residential environments. For indoor or outdoor installation.

HOW POWERCLAMP OPERATES
POWERCLAMP Transient Voltage Surge Suppressor (TVSS) device is a passive, multi-staged hybrid high energy parallel device designed to react to the onset of surges with fast rise times and high amplitude ranges such as those which follow sags or other external or atmospheric induced impulses.

POWERCLAMP senses the fast ramp of the transient and automatically fixes on the peak of the line voltage waveform. The unit incorporates sine wave tracking, to ‘float’ the clamping threshold with the rise and fall of the peak of the AC waveform without creating wave shape distortion. Response times are within 1-2 nanoseconds. POWERCLAMP will clamp most transients to within 2-10 volts of the AC waveform. Units operate at up to 120% of the normal line voltage.

Download Tech Specs